Solution to water ingress in Xinbaofeng wires and cables

        XinbaofengSolution to water in the wires and cables

 1. After laying the cable, the cable head should be arranged in time and the wiring should be completed to eliminate buds hidden dangers in.

 2. If only the two ends of the cable have water ingress, please cut off both ends and reconnect the cable.

 3. If the cable has an obvious water inlet point, the cable must be cut off near the water inlet point and connected in the middle.

 4. It is inevitable that water will accumulate in outdoor cable wells or cable channels. Try to secure the cable with the highest possible bracket.

 5. Use special hot nitrogen to pressurize and dry the internal cables. Such professional equipment is usually not available.

 6. Conduct pressure leakage tests on cables regularly to ensure that the operating status of the cables is known in a timely manner.